Policy Text:
The Ministry of the Environment and Climate Change shall not issue any Environmental Compliance Approvals for a future waste disposal site within the meaning of Part V of the Environmental Protection Act where the threat from the establishment, operation or maintenance of such a site could be significant.
For Environmental Compliance Approvals that exist in the areas where the threat could be significant for waste disposal sites within the meaning of Part V of the Environmental Protection Act, the Ministry of Environment and Climate Change shall review their terms within three years of the date the Source Protection Plan takes effect and amend the Approval as necessary to ensure that the terms of each Approval adequately addresses the threats to source water. The Director, as defined in the Environmental Protection Act or its Regulations, may determine another implementation date based on a prioritized review of Environmental Compliance Approvals that govern significant drinking water threat activities.
This policy applies for the named activities and threat subcategories in the following vulnerable areas:
Application of hauled sewage to land:
Callander IPZ-1, IPZ-2, and Issue Contributing Area (ICA only if
related to a circumstance containing phosphorus);
Mattawa WHPA-A and B;
North Bay IPZ-1;
Powassan WHPA-A and B1; and
South River IPZ-1.
Discharges from
the storage and treatment of tailings from mines:
Callander IPZ-1 and Issue Contributing Area (ICA only if related to
a circumstance containing phosphorus);
Mattawa WHPA-A and B;
Powassan WHPA-A and B1; and
South River IPZ-1.
Landfarming of petroleum refining waste AND landfilling (hazardous waste)
AND storage of hazardous waste or liquid industrial waste:
Callander IPZ-1;
Mattawa WHPA-A and B;
Powassan WHPA-A and B1; and
South River IPZ-1.
Landfilling
(municipal waste) AND landfilling (solid non-hazardous industrial or commercial):
Callander IPZ-1;
Mattawa WHPA-A, B and C;
Powassan WHPA-A, B1/B2/B4 and C1; and
South River IPZ-1.
Liquid industrial waste injection into a well:
Mattawa WHPA-A, B and C; and
Powassan WHPA-A, B1/B2/B4 and C1.